SIERRA Innova-Sonic 205i Insertion
General Description
Innova-Sonic™ Model 205i is commonly ordered with standard clamp-on transducers, however, insertion transducers are a good choice when their are signal strength issues due to difficult piping configurations. To eliminate issues with pipe wall thickness, pipe liners, and/or pipe wall deposits, the 205i insertion transducers will assure signal strength and performance of the instrument. The transducers can be used on pipes that range in size from 2-inch to 400-inches (50mm to 10000mm).
Features
- Reads and detects the volumetric flow rate of most liquids
- Hot-tap installation
- Double O-ring seal
- Live insertion & extraction
- Easy meter installation, insertion sensors do not have to be inserted at an angle
|
- Wide operating temperature range -40F to +300F (-40C to 150C)
- Measuring accuracy +/-0.5%
- Wide bi-directional flow range of 0.0 to 40 fps liquids (0 to 12 mps)
- Reads a wide range of pipe sizes 2-400" (50mm-10000mm)
- Daily, monthly, and yearly totalized flow tracking: up to 5 years may be viewed
- Internally configured batch controller makes batch control convenient and accurate
|
Technical Description
Accuracy |
+/- 0.5% of reading |
Flow Rate |
0 to 12 m/s |
Temperature |
-40°C to 150°C |